PM PLUS Oil Concentrate is a blend of specially selected hydrocarbon oils, containing no solvents, detergents or solid particles. It is specifically formulated for use in most petroleum and synthetic oils.

PM PLUS Oil Concentrate unites chemically with the metal component molecules, forming a microscopic friction reducing shield, that resists breakdown under extreme conditions.

PM PLUS Oil Concentrate will assist in reducing friction, wear, temperature, replacement of parts, downtime, costly maintenance expenditures and energy consumption. It will also assist in increasing productivity, the service life of your equipment and will create a more economical and controllable maintenance operation.

PM PLUS Oil Concentrate can also be blended with most conventional metal cutting and machining oils at a ration of 5% - 10%. The blend will assist in maintaining the cutting edges of tools, thus increasing tool life. It will also allow for more material to be removed per pass and provide a smoother finish.

Available in 250 ml bottles, 4 litre containers, 20 litre pails and 205 litre drums.

Apply at a ratio of 5% (min)= 50 ml for every litre or 8 oz. for every gallon of base lubricant. Some application may require a higher percentage, but should not exceed 10%.

ASTM TEST	DESCRIPTION	TEST RESULT
D1298 D445 D445 D92 D97 D97 D482 D974 D665 D130	Specific Gravity @ 60°F Viscosity @ 100° F S.U.S. Viscosity @ 210° F S.U.S. Open Cup Flash Point Pour Point Cloud Point Ash Content % by weight TAN (mg KoH/g) Rust Syn, Sea Water Copper Strip Corrosion	1.0 68.8 34.5 147° C -53° C -18° C 0.01% 0.63 Passed I.a. Pass